|
|
|
Segway i2 Specifications
The
Segway® Personal Transporter (PT) i2
is our most versatile model, and is available
with either a gloss white or anodized black handlebar.
Learn more about the i2.
Specifications:
|
|
SPEED
Top
speed and turning rate
The maximum
forward speed and turning rate of your Segway i2
can be set using the wireless InfoKey controller.
The two settings are
Beginner Mode
Maximum
speed: 6 mph / 9.6 km/h
Slower turning
rate
Regular
Mode
Maximum speed: 12.5 mph / 20
km/h
Most responsive turning
rate
|
|
|
RANGE
Lithium-ion:
16-24
miles / 24-39 km on a single charge
depending on terrain and riding
style
|
|
|
TEMPERATURE
Lithium-ion:
14º to 122º F /-10º to 50º
C
When stored and charged at room
temperature, the i2 can perform in a wide range of
operating environments. Actual performance is
dependent on battery temperature, terrain, riding
style and payload.
|
|
|
TERRAIN
The
i2’s large tires and track width make it suitable
for a wide range of applications and terrains. Its
sensors constantly monitor the rider's position
relative to gravity. This allows the Segway i2 to
adjust for changes in terrain while keeping the
rider upright.
|
|
|
PAYLOAD
Total
capacity (rider & cargo): 260 lbs / 118
kg
Rider: 100-250 lbs / 45-110
kg
The Segway i2 can carry up to a 250 lb.
adult. It can also be fitted with optional Segway
Cargo Accessories for a total capacity of 260
lbs.
|
|
|
SPACE
Platform
height: 21
cm
Footprint: 48.3 x 63.5
cm
Ground Clearance: 7,6
cm
We designed the Segway i2 to take up no
more space than the average person. About as wide
as the average person's shoulders, it raises you 8
inches off the ground, providing a clear sight
line of your surroundings.
|
|
|
WEIGHT
105
lbs / 47 kg
Portability was a key
design objective. That's why we made the Segway i2
light enough to handle, small enough to store in
the trunk of a midsize sedan, and collapsible
enough to fit in tight storage spaces. Optional
lower cargo frames provide east-to-grip handles
for storage and transport.
|
|
|
TURNING
RADIUS
One characteristic of a
pedestrian is the ability to turn in place without
impacting any nearby person or object, something
few vehicles can do. By balancing on a single
axle, Segway i2 riders can also turn in
place.
|
|
|
POWER
Lithium-ion
(Li-ion) Battery Packs
The i2
comes with Saphion lithium-ion battery packs. The
batteries are designed with on-board electronics
that automatically monitor both the condition and
temperature of the batteries. Batteries can be
recharged by utilizing any 90 to 260 volt and 50
to 60 Hz AC outlet (typically accessible in most
countries). A complete cycle charge will take
eight to ten hours, which at 10 cents per KW-h,
equates to about the cost of a newspaper. Li-ion
batteries are designed for approximately1000 full
charge/discharge cycles.
|
|
|
SAFETY
Redundant
electrical systems
Robust
mechanical systems
Safety is our
top priority in both design and operation. To help
ensure that both Segway PT users and those near
them remain safe, we built redundancy into the
balancing and electrical systems. If any system
begins operating at diminished capacity, the other
is programmed to assume responsibility. This
allows the Segway PT to maintain balance and bring
the rider to a safe stop. We implemented the
highest design standards in building the Segway
PT's mechanical structures, and each part has been
thoroughly tested and analyzed to ensure such high
standards were met. Millions of fatigue cycles and
thousands of hours of ride testing were completed
in the development of the Segway
PT.
|
Contact Form
Dealers
| |
|
 Contact Form
FAQ
|
Future Concepts Ltd. 25/7 Cuu Long Street, Ward
2, Tan Binh District, Ho Chi Minh City, Vietnam
info@segway.com.vn
- Telephone: +84 (0)8 88487816, Fax: +84 (0)8 8446007
|
| |
|
Personal Transporters
